Knog Pwr Mountain 2000 Lumen Front Light

The PWR Mountain 2000 Front Bike Light is a high powered modular light designed to flood trails with an extremely bright beam. Best suited to mountain bikers bikepackers and trail riders you can ride confidently with PWR Mountain lighting the way. PWR Mountain is part of Knog’s PWR Modular System meaning you can swap light heads mounts and use its battery as a PWR Bank to charge any USB device. Extremely bright circular flood beam USB Rechargeable Waterproof with IP66 rating storm proof 6 light modes + fully customisable with Knog's Modemaker app USB rechargeable Battery can be used separately as a 10 000 mAh power bank Bike mount included Easy twist operation RUNTIME MODE LUMENS RUNTIME Max 2000 2hrs Mid 500 9hrs Stamina 200 30hrs Pulse 1000 20hrs Strobe Flash 250 35hrs Eco-Flash 150 200hrs FEATURES PWR is an ecosystem of bike and outdoor products designed to share their battery. But that battery also works as a power bank to charge your devices. PWR Mountain runs for 2 hours at 2000 lumens or up to 200 hours in Eco-flash mode. Elliptical beam – Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Programs your modes – The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light then select and tailor modes from the menu. You can do things such as control brightness adjust runtimes and add new light modes. Functionality – Twisthead operation to turn light on / off and to scroll through light modes no buttons. Charge your devices – Rear of the light is a USB rechargeable power bank. Use this to charge your phone GoPro or cycle computer on the go. 1 hour riding @2000 lumens means you can almost fully charge your iPhone twice. Charge time 7 hours. SPECIFICATION Light output: 2000 Lumens. Power Bank: 10 000 mAh. Dimensions: 129.5 x 48mm ∅. Weight: 335g. Battery indicator. Charges your devices. CNC Machined. Programmable modes. Interchangeable lightheads. Twist operation. USB rechargable. Water resistant when cap is on. INSTRUCTIONS Connect lighthead to PWR bank: Insert the two lighthead plug pins into the battery. When connected your lightheads LED's will flash. Connect lighthead to sidemount: Slide the mount into the slot on the side of the battery. Then tighten the thumbwheel. To remove the mount you will need to loosen the thumbwheel. Operation: Once the lighthead and battery are connected twist the lighthead and hold to turn on twist and release to change modes.